Cut cardboard, packaging, leather and carpet without a sore hand.
A powered rotary blade does the cutting. A short BOOST cycle adds power for thicker material, and the blade sharpens itself in ten seconds.
Up to ~6 mm thick
285 rpm BOOST
Self-sharpening
USB-C
~6 mmCutting thickness
285 rpmBOOST speed
2 N·mMaximum torque
~40 minContinuous use
Features
What it does well.
BOOST when the material is thick
A ten-second BOOST mode raises the blade to 285 rpm for corrugated board, leather and carpet up to about 6.35 mm (¼ inch), depending on the material.
Titanium-coated blade, sharpened in seconds
The 420 stainless-steel blade has a titanium coating. A built-in ten-second sharpening cycle keeps it keen, and the blade changes without tools.
Tool-free blade swap
Digital battery display
Safety lock-off
Hold the ON/OFF switch, press and release the lock-off button, then keep holding to cut. It helps prevent accidental starts.
What it is not for
Soft or stretchy fabric is hard to control with a rotary blade. For cloth, ordinary fabric scissors work better.
In the box
Ready to cut out of the box.
EdgeFlow cordless electric scissors
Storage bag
USB-C charging cable
User documentation
Specifications
EdgeFlow Electric Scissors at a glance.
Model
QWJDA001
Maximum speed
285 rpm
Maximum torque
2 N·m
Cutting thickness
Up to about 6.35 mm (material dependent)
Battery
2000 mAh lithium-ion, 3.6 V
Runtime
About 40 min continuous
Charging
USB-C, 5 V 1 A, about 150–180 min
Size
About 215 × 107 × 61 mm
Weight
About 430 g
Power adapter
Not included
Warranty
12 months, India
Country of origin
China
FAQs
Questions buyers ask.
Can it cut cloth?
It is designed for cardboard, plastic packaging, leather and carpet. Soft or stretchy fabric is harder to control; traditional fabric scissors are better for cloth.
How thick can it cut?
Up to about 6.35 mm (¼ inch), depending on the material. Use BOOST for the thickest cuts.
How do I keep the blade sharp?
Run the built-in ten-second sharpening cycle. When the blade wears out, swap it without tools as shown in the manual.
Can I use it while charging?
No. Charge it fully first, then unplug before cutting.
Product declarations
Imported & marketed by
Sophus Technosol Private Limited, Durga Complex, 2nd Floor, #38/1, 3rd Cross, Sahakarnagar G Block, Bengaluru, Karnataka 560092, India
